Copying; Basic Procedure - Savin 2235 Operator's Manual

AdonisC2_ENcopy122F_FM.book Page 29 Thursday, February 15, 2001 3:23 PM

Basic Procedure

A
Make sure that the machine is in
Copy mode.
If the machine is not in Copy
mode, press the {Copy} key.
B
When the machine is set for the
user code, enter the user code
with the number keys and then
press the { { { { #} } } } key.
Reference
⇒ P.68 "Other Functions".
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{Clear Modes} key.
D
Set your originals.
Reference
⇒ P.31 "Setting Originals".
E
Set your desired settings.

2. Copying

F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
can be set between 1 and 999
(default: 999).
❒ To change the number entered,
press the {Clear/Stop} key and
enter the new number.
G
Press the { { { { Start} } } } key.
The machine starts copying.
Note
❒ When you set originals on the
exposure glass, press the {#}
k e y a f t e r a l l o r i g i n a l s a r e
scanned.
❒ Copies are delivered face down.
❒ To stop the machine during the
multi-copy run, press the {Clear/
Stop} key.
❒ To return the machine to the ini-
tial condition after copying,
press the {Clear Modes} key.
29