Selecting Copy Paper - Savin 2235 Operator's Manual

AdonisC2_ENcopy122F_FM.book Page 40 Thursday, February 15, 2001 3:23 PM
Copying

Selecting Copy Paper

There are two ways to select copy paper:
❖ ❖ ❖ ❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio. ⇒ P.42 "Rotated copy".
2
❖ ❖ ❖ ❖ Manual Paper Select
Choose the tray containing the paper you wish to copy onto: Paper Tray, By-
pass Tray or large capacity tray (LCT).
Reference
⇒ P.60 "Copying from the Bypass Tray".
Limitation
❒ Auto Paper Select mode is intended for normal and recycled paper.
❒ If you set all the paper trays other than "No Display" or "Recycled Paper",
you cannot use Auto Paper Select.
Note
❒ See the following table for possible copy paper sizes and directions with Auto
Paper Select (when copying at a ratio of 100%):
❖ ❖ ❖ ❖ Metric version
Where Original Is Set
Exposure glass
Document feeder
❖ ❖ ❖ ❖ Inch version
Where Original Is Set
Exposure glass
Document feeder
❒ For some originals, the original size might not be detected correctly. ⇒ P.20
"Sizes difficult to detect".
❒ When you set special paper, such as recycled paper, in the paper tray, you can
have the paper type shown on the display. ⇒ "Special Paper Indication" in
the System Settings manual.
40
Paper Size and Direction
A3L, B4L, A4KL, B5KL
A3L, B4L, A4KL, B5KL, A5KL,
11" × 17"L, 8 " × 11"KL
1
/
2
Paper Size and Direction
11" × 17"L, 8 " × 14"L, 8
1
/
2
A4KL, 11" × 17"L, 8 " × 14"L,
1
/
2
" × 11"KL, 5 " × 8
1 1 1
8 / / /
2 2
" × 11"KL
1
/
2
"KL
2