Table of Contents
Advertisement
AdonisC2_ENcopy122F_FM.book Page 16 Thursday, February 15, 2001 3:23 PM
Basics
Turning On the Power
A
Press the operation switch to
1
make the On indicator goes on.
The display panel will come on.
Note
❒ If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
❒ During the warm-up period
(less than 10 seconds for Type 1,
less than 15 seconds for Type 2),
you can use the Auto Start func-
tion.
16
Turning Off the Power
A
Make sure that the platen cover or
the document feeder is in the
right position.
B
Press the operation switch to
make the On indicator goes off.
Note
❒ Even if you press the operation
switch, the indicator do not
goes off and blink in the follow-
ing cases:
• When the platen cover or the
document feeder is open.
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment.
• When the hard disk is oper-
ating.
Advertisement
Table of Contents
