AdonisC2_ENcopy122F_FM.book Page 11 Thursday, February 15, 2001 3:23 PM
Display Panel
The display panel shows the status of the machine, error messages and function
menus.
Important
❒ Do not apply a strong shock or force of about 30 N (about 3 kgf) or more to
the display panel. If you do, the display might be damaged.
Note
❒ The function items displayed serve as selector keys. You can select or specify
an item by lightly pressing it.
❒ When you select or specify an item on the display panel, it is highlighted like
.
❒ Keys appearing as
Displays and Key Operations
Note
❒ The following illustrations are examples for the machine with the optional 2
Tray finisher and large capacity tray (LCT) installed.
❖ ❖ ❖ ❖ Initial copy display
1.
Original mode, Image Density
and Special Original mode.
2.
Operational status or messages.
3.
You can register up to three fre-
quently used reduce/enlarge ratios
other than the fixed reduce/enlarge
ratios. ⇒ ⇒ ⇒ ⇒ "Shortcut R/E" in P.219
"Reproduction Ratio
cannot be used.
OK
4.
into memory, number of copies set,
and number of copies made.
5.
mode.
1
/
".
2
The number of originals scanned
Sort, Stack, Staple or Punch
11