MSI X79A-GD65 (8D) Series Manual page 63

Hide thumbs Also See for X79A-GD65 (8D) Series:
Table of Contents

Advertisement

tWRDRDD
Wrte-Read Dfferent Ranks same or Dfferent DIMM.
tRWSR
Read-Wrte Same Rank.
Spread Spectrum
Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng
clock generator pulses.
Important
If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system
stablty and performance. But f you are plagued by EMI, select the value of Spread
Spectrum for EMI reducton.
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the
system wll become less stable. For the most sutable Spread Spectrum value, please
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght
jtter can ntroduce a temporary boost n clock speed whch may just cause your
overclocked processor to lock up.
Vdroop Control
Load lne droop controls the stream of current to the CPU.
[Auto]
Automatcally sets values for maxmum stablty.
[Low VDroop]
Provdes less fluctuaton (better for overclockng).
CPU Core Voltage/ System Agent Voltage (SA)/ CPU I/O Voltage/ CPU PLL Voltage/
DDR CH_A/B Voltage/ DDR CH_C/D Voltage/ DDR CH_A CA Vref Voltage/ DDR CH_B
CA Vref Voltage/ DDR CH_C CA Vref Voltage/ DDR CH_D CA Vref Voltage/ DDR
CH_A DQ Vref Voltage/ DDR CH_B DQ Vref Voltage/ DDR CH_C DQ Vref Voltage/
DDR CH_D DQ Vref Voltage/ PCH 1.1 Voltage/ PCH 1.5 Voltage.
These tems are used to adjust the voltage of CPU, Memory and chpset.
Current CPU Core Voltage/ Current SA Voltage/ Current DDR CH_A/B Voltage/
Current DDR CH_C/D Voltage
These tems show current CPU/ DRAM voltage. Read-only.
Overclockng Profiles
Press <Enter> to enter the sub-menu.
Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu.
Set Name for Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Gve a name by typng n ths tem.
Save Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclockng settngs to ROM for selected profile.
Load/ Clear Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Load/ Clear the stored profile settngs from ROM.
MS-7760
MS-7760
2-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms-7760

Table of Contents