Advertisement
NOTE
•
Press the stand until the button rises to maximum height.
CAUTION
•
Illustrations in this document represent typical procedures, so they may look different from the actual
product.
•
Do not use foreign substances (oil, lubricants) when assembling the product. (This may damage the product)
•
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•
Do not carry the monitor upside down by just holding the stand base. This may cause the monitor to fall off
the stand and could result in personal injury.
•
When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
NOTE
•
The stand can be disassembled by following the assembly steps in the opposite order.
10
Tidying up Cables
Arrange the cables using cable holders as shown in the illustration.
Advertisement
