Table of Contents
Advertisement
Preparation
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter
clockwise to open it (A, B).
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
C
Before initial use, fill the water
softening system with 1 litre of
water (C).
Dishwasher / User's Manual
3. Fill the salt reservoir with salt by using
salt funnel (D). To speed up dissolution rate
of salt in water, stir it with a spoon.
C
You can put about 2 kg of
Dishwasher salt into the salt
reservoir.
4. Replace the lid and tighten it securely
when the reservoir is full.
5. If you will not start a washing programme
immediately after adding the salt, run the
machine empty in the shortest programme
to dissolve and wash away the scattered
salt in the machine.
13 / 43 EN
Advertisement
Table of Contents
