Table of Contents
Advertisement
Preparation
4
Tips for energy saving
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wipe away any coarse food remnants on
the dishes before putting them in the
product. Operate the product after filling it
completely. When selecting a programme,
consider the table of "Programme data and
average consumption values".
Do not put more detergent than suggested
on the detergent package.
Water softening system
C
Your dishwasher requires soft
water. If the hardness of the
water is above 6°dH, the water
must be softened and descaled.
Otherwise, ions that create
the hardness will accumulate
on the surfaces of the dishes
and may adversely affect the
washing, shining and drying
performances of the product.
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water that enters
into the product to a level that will allow
washing the dishes with the required
quality.
Adjusting the water
softening system
Washing performance will increase when
water softening system is adjusted
properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
/43 EN
12
Adding salt
Water softening system needs to be
regenerated in order that the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
We recommend using granular
or powder softening salts. Do
not use salts that are insoluble
in water such as table salt or
common salt. Performance of
water softening system may get
worse in time.
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
Dishwasher / User's Manual
Advertisement
Table of Contents
