Sony DSCRX10M2.CE3 Manual page 140

Sets items for [Detail].
Level: Sets the [Detail] level. (-7 to +7)
Adjust: The following parameters can be selected manually.
Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details
are set manually.))
V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the
vertical (V) side) to +2 (off to the horizontal (H) side))
B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W).
(Type1 (off to the lower DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))
Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit
level: unlikely to be limited))
Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening
level))
Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)
Copy
Copies the settings of the picture profile to another picture profile number.
MENU → (Camera Settings) → [Picture Profile] → [Copy]
Reset
Resets the picture profile to the default setting. You cannot reset all picture profile settings at
once.
MENU → (Camera Settings) → [Picture Profile] → [Reset]
Note
Since the parameters are shared for movie and still images, adjust the value when you
change the shooting mode.
If you print RAW images with shooting settings, the following settings are not reflected.
Black Level
Black Gamma
Knee
Color Depth
When the [ Record Setting] is [120p 100M]/[100p 100M] or [120p 60M]/[100p 60M],
[Black Gamma] is fixed at "0" and cannot be adjusted.
If you change [Gamma], the available ISO value range changes.
When using S-Log2 gamma, the noise becomes more noticeable compared to when
using other gammas. If the noise still is significant even after processing pictures, it may
be improved by shooting with a brighter setting. However, the dynamic range becomes
narrower accordingly when you shoot with a brighter setting. We recommend checking
the picture in advance by test shooting when using S-Log2.