D-Range Opt. (Dro) - Sony DSCRX10M2.CE3 Manual

under [Multi Frame NR]. Select [ISO AUTO] under [ISO] and press the right side of the
control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO
Minimum]. The values for [ISO AUTO Maximum] and [ISO AUTO Minimum] are also
applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
[102] How to Use

D-Range Opt. (DRO)

By dividing the image into small areas, the product analyzes the contrast of light and shadow
between the subject and the background, and creates an image with the optimal brightness
and gradation.
1. MENU →
2. Select the desired setting using the left/right side of the control wheel.
Menu item details
D-Range Optimizer: Auto:
Corrects the brightness automatically.
D-Range Optimizer: Lv1 ― D-Range Optimizer: Lv5:
Optimizes the gradation of a recorded image for each divided area. Select the optimization
level from Lv1 (weak) to Lv5 (strong).
Note
[DRO/Auto HDR] is fixed to [Off] when the shooting mode is set to [Sweep Panorama], or
when [Multi Frame NR] or [Picture Effect] is set to other than [Off].
[DRO/Auto HDR] is fixed to [Off] when [Picture Profile] is set to something other than
[Off].
[DRO/Auto HDR] is fixed to [Off] when the following modes are selected in [Scene
Selection].
[Sunset]
[Night Scene]
[Night Portrait]
[Hand-held Twilight]
[Anti Motion Blur]
The setting is fixed to [D-Range Optimizer: Auto] when [Scene Selection] modes other
than the above modes are selected.
When [ Record Setting] is set to [120p 100M], [100p 100M], [120p 60M] or [100p
60M], [DRO/Auto HDR] will be set to [Off].
Using shooting functions
(Camera Settings) → [DRO/Auto HDR] → [D-Range Opt.].
Correcting the brightness or contrast