Table of Contents
Advertisement
History Description of major changes
V1.0
V2.0
Add usb update table on Page 10 2013-12-28
1.Overview
MS306 series chassis is designed for Asia Pacific/South America market.
Both Full HD panel and HD panel can be compatible. The signal sources
includeTV,AV,YPBPR/YCBCR,VGA,HDMI and USB. For YPBPR,HDMI source ,Format
up to 1080p can be supported; USB support image, audio and video(up to
H.264)playing; The whole process of alignment includes ADC calibration
and White Balance adjustments.
2.Factory Menu
1、Methods of Entering
Method 1：Using the remote ,enter the "Picture" submenu
choosing the "contrast" item
Factory Menu will appear in the left top of screen
Method 2：Press RETURN button when FACTORY HOTKEY is enabled(ON).
2. General introduction
FACTORY MENU
ITEMS
1-FAC HOTKEY
2-WARM UP
Default
Description
Setting
Factory
OFF
(OFF/ON).Should be OFF after factory
alignment
OFF：The set would enter standby mode
after
signal；
OFF
ON ： Aging mode. Aging time will
display on the left bottom of screen.
Release Date Changed by
2013-04-28
and
press the 9,7,3 and 5 in series,
hotkey
15
minutes
Zhangjin
in the OSD;
Switch
without
input
Status
OK
OK
Advertisement
Table of Contents
