Test And Alignment; Factory Menu Description - Panasonic TH-65C300K Service Manual

TH-65C300K/TH-65C300M/TH-65C300T

5 Test and Alignment

5.1.

Factory Menu Description

Follow the below steps to pop-up the Factory menu in case of "FactoryKey" is disabled:
• Press RCU "MENU" key to display main menu
• Select "Picture" and press "OK" key to enter into Picture submenu
• Scroll down to "Contrast" item
• Press the subsequence RCU keys "9", "7", "3" and "5"
In case of "FactoryKey" is enabled, just press RCU "Return" key to pop-up again the Factory menu.
The status of "Factory Key" can be changed in "Factory Menu->Hotkey"
• Press RCU "OK/g" key to enter the submenu.
• Press RCU "Menu" key to go back to the root menu.
• Press RCU "f/g" key to change the values.
• Press RCU "OK" key run the function.
• Press RCU "Exit" key exit the Factory menu.
1 - Hotkey submenu
Item
Hotkey
2 - Warm-Up Mode submenu
Item
Burning
Mode
3 - ADC submenu (N/A - menu reains grayed)
4 - White Balance submenu
Item
White Balance
Sub-item
Sub-item
Sub-item
Source
Color Temperature
RED Gain
GREEN Gain
BLUE Gain
RED Offset
Value
Off/On
Value
Off/On
Value
HDMI/VGA/DTV
PAL/SECAM
NTSC/RGB/CMP
Normal/Warm/Cool
000..255
000..255
000..255
000..255
8
Note
Enable Hotkey flag by
pressing "fg" key to have
possibility to access Fac-
tory menu with "RETURN"
key (default is disabled)
Note
Enable Burning mode by
pressing "fg" key, then
press "EXIT" key to activate
it Press "Menu" key on
local keyboard to exit the
Burning mode
Note
Select by pressing "fg"
key
Select Tone by pressing
"fg" key
Set R Gain by pressing
"fg" key (-127..+128 for
offset)
Set G Gain by pressing
"fg" key (-127..+128 for
offset)
Set B Gain by pressing
"fg" key (-127..+128 for
offset)
Set R Offset by pressing
"fg" key (-127..+128 for
offset)