Related Manuals for Froggy's Fog FOBBLES F8 PRO
Summary of Contents for Froggy's Fog FOBBLES F8 PRO
- Page 1 FBM-FOBBLES-F8-PRO User Manual FROGGYS FOG LLC Sales@froggysfog.com 615-469-4906 V1.0...
-
Page 2: Table Of Contents
FBM-FOBBLES-F8-PRO User Manual Table of Contents BEFORE YOU BEGIN ............................3 What Is Included ............................ 3 Unpacking Instructions ........................... 3 Symbols ..............................3 Disclaimer .............................. 3 Safety Notes ............................3 1.5.1 Personal Safety ............................. 3 1.5.2 Mounting and Rigging ........................... 4 1.5.3 Power and Wiring .......................... -
Page 3: Before You Begin
Disclaimer The information and specifications contained in this User Manual are subject to change without notice. FROGGY'S FOG assumes no responsibility or liability for any errors or omissions and reserves the right to revise or to create this manual at any time. -
Page 4: Mounting And Rigging
In the event of a serious operating problem, stop using the product immediately. • Use only FROGGY'S FOG brand fluid. Fobbles premium bubble fluid and Fobbles quick dissipating fog fluid are recommended. • Only specifically designed water-based scent additives may be added to the fog fluid. Never add flammable liquids of any kind (oil, gas, non-application specific perfumes). -
Page 5: Introduction
Description FROGGY'S FOG FOBBLES F8 PRO is a newly launched professional bubble fog machine for big stages and event halls. The 4-nozzle design can help produce a huge number of bubbles filled with fog. The innovative and patented Jet-design ensures fog is encapsulated inside the bubbles, while avoiding ambient fog dispersing in the air. -
Page 6: Technical Specifications
SETUP AC Power The Fobbles F8 Pro machine has an input voltage of AC 110 V-120 V, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 7: Ac Plug
AC Plug The FOBBLES F8 PRO Supper Bubble Fogger comes with a power input cord terminated with a lockable power connector on one end. If the power input cord that came with your product has no plug, or if you need the change the plug, use the table below to wire the new... -
Page 8: Rigging
FBM-FOBBLES-F8-PRO User Manual 4.5.2 Rigging Using the following general guidelines when mounting this product: • Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes. • Make sure that the structure or surface onto which you are mounting the product can support the product’s weight (see the Technical Specifications). -
Page 9: Menu Map
Trigger manual VOLUME output mode ENTER Save settings STOP turns the fog output off 5.2.1 Menu Map Display Description Parameter Range Fobbles F8 Pro Firmware Information Version XX Fobbles F8 Pro Voltage Information AC-120V 60Hz Standby page Heating Up The unit is heating. -
Page 10: Dmx Mode & Operation
DMX starting address which can be adjusted by pressing ▲ or ▼. 5.3.2 DMX Channel Assignments and Values FOBBLES F8 PRO Bubble Fogger has 4 DMX channels and can be connected by 3-pin or 5-pin DMX sockets. Set the DMX start address within the range of 001-512. -
Page 11: Technical Information
Maintenance Do not allow the FOBBLES F8 PRO to become clogged due to residue buildup of bubble and fog fluid. Cleaning and preventative maintenance are necessary to keep your machine running issue free. Please follow these instructions for safely cleaning of your Fobbles machine if output become noticeably decreased. -
Page 12: 6.2 Storage
Restore the hoses and caps. Store the unit for next use once the machine is cool to the touch. Test-run your FROGGY'S FOG® FOBBLES F8 PRO monthly to achieve the best performance. 6.2 Storage Before storing the machine, clean it and empty the fluid tank.
Need help?
Do you have a question about the FOBBLES F8 PRO and is the answer not in the manual?
Questions and answers