Makita GA4041 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Armature, Spiral bevel gear [small one] (cont.)
ASSEMBLING
(2) Assemble the drive end of Armature as drawn in Fig. 5.
Fig. 5
1. Set Brake shoe holder
complete and Compression
spring 33 to Armature.
Compression
spring 33
Brake shoe
holder complete
Armature
4. Set Spiral bevel gear (small) and Flat washer 6 to Armature shaft.
Then, secure them with M6 Hex nut.
Flat washer 6
Spiral bevel
gear (small)
2. Mount Gear housing cover to
Armature to fit the groove of
the cover to Compression
spring 33 and Armature shaft
through Ball bearing 6001LLB.
Ball bearing
6001LLB
Compression
spring 33
M6 Hex nut
Wrench 10
3. Supporting Armature section
with 2 pcs. of 1R258, press
Gear housing cover to
Armature section with 1R028.
Groove of Gear
housing cover
1R258
P 5/ 14
1R028