Specifications - Panasonic DMP-BD84GN Operating Instructions Manual

Specifications

General
Signal system PAL/NTSC
Operating i5 oC to i35 oC
temperature range
Operating humidity 10 % to 80 % RH (no condensation)
range
HDMI AV output Output connector:
Type A (19 pin) 1 system
USB slot USB2.0: 1 system
Ethernet 10BASE-T/100BASE-TX 1 system
Standard Compliance:
[BDT280]
Wireless LAN IEEE802.11 b/g/n
Frequency range:
2.4 GHz band
Security:
WPA
TKIP/AES, Authentication Type:
PSK), WEP (64 bit/128 bit)
LASER Specification Class 1 LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the safety
protection
Power supply
[BDT280] [BDT180]
[BDT167] [BD84]
Power [BDT280] [BDT180] Approx. 13 W
[BDT167] [BD84] Approx. 11 W
consumption*
Approx. 0.5 W
Power consumption
(Quick Start: Off)
in standby mode*
[BDT280] [BDT180]
[For_the_United_Kingdom_
Approx. 5.5 W
and_Ireland]
[BDT167] [BD84]
Power consumption
Approx. 3.5 W
in quick start
(Quick Start: On)
standby mode
[For_Australia_and_New_Zealand]
[For_the_South_East_Asia_ [BDT280] [BDT180]
and_HongKong] Approx. 5.5 W
Power consumption
[BD84]
in quick start
Approx. 3.5 W
standby mode*
Dimensions
[BDT280] [BDT180]
(WkHkD) 312 mmk43 mmk180 mm
[BDT167] [BD84]
245 mmk38.5 mmk175 mm
Mass
[BDT280] [BDT180]
Approx. 1.0 kg
[BDT167] [BD84]
Approx. 0.8 kg
* [BD84] Using supplied AC adaptor
≥ Specifications are subject to change without notice.
/WPA2 (Encryption Type:
TM TM
[For_the_United_Kingdom_and_Ireland]
[For_Australia_and_New_Zealand]
AC 220 to 240 V, 50 Hz
[For_the_South_East_Asia_and_HongKong]
AC 220 to 240 V, 50 Hz/60 Hz
DC 12 V 0.8 A (DC IN terminal)
Reference
File format
File format Extension
".MKV", ".mkv"
[Except_South_East_Asia]
[Except_HongKong]
Subtitles text
MKV
file
".SRT", ".srt",
".SSA", ".ssa",
".ASS", ".ass"
".AVI", ".avi"
[Except_South_East_Asia]
[Except_HongKong]
Subtitles text
Xvid
file
".SRT", ".srt",
".SUB", ".sub",
".TXT", ".txt"
mp4
".MP4", ".mov"
(H.264+AAC)
".mpg", ".mpeg",
MPEG
".m2ts", ".mts",
(TS/PS)
".ts"
".JPG", ".jpg",
JPEG
".jpeg"
[BDT280]
[BDT180]
".MPO", ".mpo"
[BDT167]
MPO
MP3 ".MP3", ".mp3"
FLAC ".FLAC", ".flac"
WAV ".WAV", ".wav"
".M4A", ".m4a",
AAC
".AAC", ".aac"
WMA ".WMA", ".wma"
".DSF", ".dsf",
DSD
".DFF", ".dff"
ALAC ".M4A", ".m4a"
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
- 34 -
Reference
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV/Xvid files
may not be played back
correctly, depending on
the video resolution,
frame rate condition,
subtitle format and so
on.
Some mp4/MPEG files
may not be played back
correctly, depending on
the video resolution,
frame rate condition and
so on.
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
3D still picture
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
Maximum sampling rate:
192 kHz/24 bit
Maximum sampling rate:
192 kHz/24 bit
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/320 kbps
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/385 kbps
Maximum sampling rate:
5644 kHz/8 ch
Maximum sampling rate:
192 kHz/24 bit/2 ch