Seagate ST1000NX0303 Product Manual page 10

Drive specification
Temperature gradient
(°C per hour max)
Relative humidity
Relative humidity gradient
Altitude, operating
Altitude, nonoperating
(below mean sea level, max)
Operational Shock (max at 2 ms)
Non-Operational Shock
(max at 2 ms)
Vibration, operating
Operation Rotational vibration
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle**
Performance seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Load-unload cycles
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
Seagate Enterprise Capacity 2.5 HDD v3 SATA Product Manual, Rev. E
ST2000NX0243 ST2000NX0253
ST2000NX0283 ST2000NX0303
To determine the warranty for a specific drive, use a web browser to access the following web page:
http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be provided:
the drive serial number, model number (or part number) and country of purchase. The system will display
the warranty information for the drive.
300,000 (25°C, 50% rel. humidity) (600,000 design life testing)
ST2000NX0403 ST1000NX0423
20°C (operating)
20°C (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
20% per hour max
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
25 Gs
400 Gs
10–500 Hz: 0.5 Gs
20–1500Hz: 16 rads/s²
10–500 Hz: 2.4 Grms ref
2.8 (typical)
3.0 (max)
3.2 (typical)
3.4 (max)
15
1 sector per 10 bits read
0.44% based on 8760 POH
Yes
ST1000NX0313 ST1000NX0303
ST1000NX0353 ST1000NX0343
9