Adjustment Instruction - LG 32LH250H Service Manual

1. Application Object
This spec sheet is applied all of the LCD TV with LA96C
chassis.
2. Designation
2.1 The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
2.2. Power Adjustment: Free Voltage
2.3. Magnetic Field Condition: Nil.
2.4. Input signal Unit: Product Specification Standard
2.5. Reserve after operation: Above 15 Minutes
2.6. Adjustment equipments: Color Analyzer (CA-210 or CA-
110), Pattern Generator (MSPG-925L or Equivalent),
DDC Adjustment Jig equipment, SVC remote controller
Caution : When still image is displayed for a period of 20
minutes or longer (especially where W/B scale is strong.
Digital pattern 13ch and/or Cross hatch pattern 09ch),
there can some afterimage in the black level area.
3. Method of PTC MICOM Download
3.1 Connection of MICOM JIG
1) Connect port(3) with Power Code
2) Connect jack(1) with PTC Micom.
3) Connect USB Cable to the computer
4) Download Program execution (SAP Configuration)
• Notice!
Because PTC Download JIG has internal memory, it can save
download files using download program (SAP Configuration).
Push the START button (4) after file saving, then it execute
download.
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes

ADJUSTMENT INSTRUCTION

- 9 -
3.2 Execution of download program (SAP
Configuration)
3.2.1 Execution of SAP Configuration
1
2
3 4
1. Select HCS12
2. Target Frequency Settings :
A. Checking the factor -> Use Specified Target Frequency...,
Unsecure target....
B. Insert Target Bus Frequency -> 7372800
3. Specify Algorithm: 9S12dt128_128k .12P
4. Specify S Record: select download file.
5. Checking factor: Erase Device, Blank Check Device,
Program Device, Verify Device
• Notice!
Don't check other checking boxes. You must follow fig.
6. Push the 'Save Image to Cyclone PRO' button, files
transfer from PC to the Download JIG.
LGE Internal Use Only