Setting Up Wireless Printing From A Smart Device Using Epson Smart Panel - Epson WF-7820 Series User Manual

Note: If you don't see the
password incorrectly. Repeat these steps to try again.
Parent topic:
Related references
Status Icon Information
Related tasks
Entering Characters on the LCD Screen

Setting Up Wireless Printing from a Smart Device Using Epson Smart Panel

You can use the Epson Smart Panel app to connect your Epson product to a wireless network or
connect your smart device directly to the product. Epson Smart Panel is available on iOS and Android
devices.
Make sure you have the following:
• A Bluetooth-enabled device that is connected to a wireless network
• The Epson Smart Panel app installed on the device
• The wireless network name (SSID) and password
Note: Your device must be close enough to the product to create and maintain a Bluetooth connection.
1. Make sure the product is turned on and is ready to print.
Note: You must perform initial setup and ink installation before setting up wireless printing.
2. Open the Epson Smart Panel app on your device.
3. Do one of the following:
• If the app automatically recognizes the product, follow the on-screen instructions to set up the
wireless connection.
• If the app does not automatically recognize the product, select the + icon and continue with the
next step.
4. On the next screen, select Connect to a New Product.
icon, you may have selected the wrong network name or entered the
Wi-Fi Infrastructure Mode Setup
57