ENGLISH
1.
Battery cartridge
2.
Button
3.
Red part
4.
Switch trigger
5.
Lamp
6.
Reversing switch lever
7.
Speed change lever
8.
Adjusting ring
SPECIFICATIONS
Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
4
Explanation of general view
9.
Graduations
10. Pointer
11. Sleeve
12. Screw
13. Hook
14. Groove
15. Limit mark
16. Rear cover
Model
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
17. Screws
18. Spring
19. Arm
20. Recesed part
21. Carbon brush cap
22. Hole
BDF440
ø 6.8 mm x 50 mm
1.6 kg
D.C. 14.4 V
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
BDF450
13 mm
27 mm
M6
0 - 1,400
0 - 400
186 mm
1.7 kg
D.C. 18 V