TP-Link Archer C8 User Manual page 8

Chapter 1
LED Explanation
Name
(Power)
(Wi-Fi)
(Ethernet)
(Internet)
(USB)
(WPS)
Status
On The system has started up successfully.
The system is starting up or the firmware is being upgraded. Do
Flashing
not disconnect or power off your router.
Off Power is off.
On The wireless function of the router is enabled.
Off The wireless function of the route is disabled.
At least one powered-on device is connected to the router's LAN
On
port.
Off No powered-on device is connected to the router's LAN port.
Blue On Internet service is available.
The router's Internet port is connected, but the internet service
Orange On
is not available.
Off The router's Internet port is unplugged.
On The inserted USB device is ready to use.
Flashing A USB device is being identified.
Off No device is plugged into the USB port.
This light remains on for 5 minutes when a WPS connection is
On/Off
established, then turns off.
Flashing WPS connection is in progress. This may take up to 2 minutes.
Get to Know About Your Router
Indication
4