Table of Contents
Advertisement
Fitting the plinth
The ventilation grill the appliance has been manufactured with must used, if it
isn't or modified then the operation of the appliance could be affected.
The plinth must also be positioned at least 25mm from the appliance door.
If the height of the appliance is 820mm then a plinth that is 90mm in height can be
fitted without any modification. However if the height of the plinth is greater than
90mm then a cut out that is 600mm wide and the height of the cut out will vary
depending on the height of the plinth. If the height of the plinth is 140mm then the
height of the cut out should be 50mm.
Once the above has been done fix the plinth in place
18
Advertisement
Table of Contents
