TP-Link TL-WA855RE User Manual page 15

Chapter 3
Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
Note:
Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on
your extender, please refer to the instructions to set your 5GHz network.
¾ To extend another host network:
1. Go to Settings > Wireless
2. Enable Connect to 2.4GHz Network
networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
1. Move the extender closer to your router, and click
2. You can manually enter the SSID (network name) and password of the network you want to extend, and click
Save.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click Save.
¾ To enable or disable the extended network:
1. Go to Settings > Wireless
2. Extended networks are enabled by default. If you want to disable the wireless function
of a certain band, just clear the
of this band will be invalid.
3. Click Save.
¾ To change the wireless network name (SSID):
1. Go to Settings > Wireless
2. Create a new SSID in
case-sensitive.
> Connect to Network.
and click
Rescan
> Extended Network.
Enable checkbox. In this case, all the wireless settings
> Extended Network.
Extended 2.4GHz SSID
Customize Your Network
Wireless Scanner
in the top-right corner of the list.
or click Copy Host
to find all available
Password
SSID. The value is
13