Mounting On A Table - LG 65UB980V.AEK Owner's Manual

3
M4 x L20
4EA
CAUTION
When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
(Only UB85**, UB93**, UB95**, UB98**)
Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after
being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and
not tighten correctly.
NOTE
Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
Remove the protective film from the stand base
and then attach the stand body to the stand
base. (Only UC97**)
ASSEMBLING AND PREPARING

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Using the Kensington security system
(This feature is not available for all models.)
Image shown may differ from your TV.
The Kensington security system connector is
located at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit http://www.
kensington.com.
Connect the Kensington security system cable between
the TV and a table.
27