End Time - Bosch Fornuis HGD4451.0N Instruction Manual

Set the cooking time with the
4.
Value suggested for the
Value suggested for the
The oven will switch on after a few seconds. The display panel
shows the cooking time elapsed and the [
on. The other time symbols switch off.
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show : . Press the
‹‹ ‹‹
cooking time with the or
@
twice and turn the function control knob to the zero setting. The
oven is off.
Changing the cooking time
Change the cooking time with the
time is shown after a few seconds. If the timer has been
programmed, first press the
Cancelling the cooking time
Reset the cooking time to
time is shown after a few seconds. The time has been
cancelled. If the timer has been programmed, first press the
button.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer U , the cooking time
the actual time 0 , press the
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.

End time

The oven allows you to set the time when you want the food
ready. The oven switches on automatically and switches off at
the set time. For example, the food may be placed in the oven
in the morning and the oven set so that it is ready at midday.
Ensure that the food will not go off if it is in the oven for too
long.
Example in the picture: It is now 10:30 am, the cooking time is
45 minutes and the oven should switch off at 12:30 pm.
Set the function control knob.
1.
Set the temperature control knob.
2.
Press the button twice.
0
3.
Set the cooking time with the
4.
16
or buttons.
@ A
@ button = 30 minutes
button = 10 minutes
A
] symbol comes
r
button. Programme a new
0
buttons. Or press the
A 0
or buttons. The new
@ A
button.
0
: with the button . The new
‹‹ ‹‹ A
r , the end time
0 sensor repeatedly until the
@ or A buttons.
Press the
0
5.
The square brackets are shown next to
will be ready is displayed.
Delay the end time using the
6.
button
The oven displays the programmed time after a few seconds
and is set to standby. The time when the dish will be ready is
displayed and the end time
brackets. The symbols
turned on, cooking time progress is shown and the symbol
appears in square brackets. The symbol
0
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
cooking time with the
twice and turn the function control knob to the zero setting. The
oven is off.
p or
Changing the end time
Change the end time using the buttons
shown after a few seconds. If the timer has been programmed,
first press the
cooking time has already started to count down. The final result
may not be the same.
Cancelling the end time
Reset the end time to the current time by pressing
time is shown after a few seconds. The oven switches on. If the
timer has been programmed, first press the
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
the actual time
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.
button.
@ or A buttons.
symbol will be shown in square
p
and turn off. When the oven is
U 0
: . Press the button. Programme a new
‹‹ ‹‹ 0
or buttons. Or press the
@ A
@
button twice. Do not change the end time if the
0
, the cooking time
U r
, press the sensor repeatedly until the
0 0
p . The time the dish
r
is turned off.
p
button
0
or . The new time is
A
. The new
A
button twice.
0
, the end time or
p