Elo TouchSystems ET3202L User Manual page 16

Parameter
When enabled, the monitor will automatically switch if a new video port is
Video Port
connected.
Discovery
The user can choose between Standard, 5%, 10% or 15% black level offset.
The saturation level of the colors change according to the chosen black level offset.
Black Level
Not available when the video source is from VGA.
The light sensor can be toggled on or off. When the light sensor is enabled, the
Brightness
brightness cannot be changed manually.
Sensor
Adjusts sharpness of the displayed images.
Default: no sharpness adjustment
Sharpness
Sharpness function is disabled when the input source ratio is the same as the
panels native ratio
Automatically adjusts the system clock to the input analog VGA video signal,
affecting the H-position, V-position, Clock, and Phase menu items.
Auto Adjust
Not applicable when using HDMI, DisplayPort video or the Computer Module.
Selects the displays color temperature. The available color temperatures are
Color
9300K, 7500K, 6500K, 5500K, 3200K and User Defined.
Temperature
Default: User Defined with R, G, and B all set to 100.
If the User Preset option is selected, the user can change the color temperature by
changing individual R, G, and B gains on a scale from 0 to 100.
User Preset
If the color space is YUV mode, then Hue and Saturation can be varied in this
menu.
Preset color modes that change the color parameters to enhance color definitions.
Available modes are: Standard, Movie, Gaming, Photo, Line mode, Legacy HDMI
Dynamic Color
Default: Standard
Modes
Legacy HDMI is only available when the video input is the HDMI source.
Allows the user to choose the audio source. The choices are From Video Source,
Line in and ECM Line-in (available only if an ECM is detected)
Audio Select
If there is no Computer Module plugged in, and the video source is HDMI, the
options are: Line In and HDMI.
Default: Video Source.
Selecting "Recall Defaults" restores all factory default settings for OSD-adjustable
Recalling
parameters (except OSD Language and OSD Position) and for Preset Video Mode
Settings
timings.
This menu allows the user to switch between the serial protocol and the DDC/CI
protocol.
Serial Protocol
DDC/CI protocol is used to communicate to a host computer via the video signal.
Default: IIC
Enables or disables the Tabletop Thermal Protection Mode settings
Tabletop
Adjusts how long a period of OSD button inactivity the Touchmonitor will wait before
closing the OSD. The adjustable range is between 5 and 60 seconds.
OSD Timer
Default: 15 seconds
Selects which language the OSD information is displayed in. The available
languages are: English, French, Italian, German, Spanish and Russian.
OSD Language
Default: English.
Available Adjustment
User Manual: Interactive Digital Signage
SW602296 Rev A, Page 16 of 39