Table of Contents
Advertisement
Chapter 5: Operation
Power
To turn the touchmonitor on or off, press the touchmonitor power button once. If a computer
module is installed, then the computer module will also turn on with the monitor.
To gracefully shut down the computer module, follow the computer modules operating systems
normal power off procedure.
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications available on the Elo website
www.elotouch.com.
Touching the screen will bring the system out of MONITOR SLEEP mode.
If long periods of disuse are planned, unplug the AC power cable to save power.
The maximum voltage, frequency and current for the touchmonitor are provided in the power
ratings table below:
Operating Voltage
100 - 240Vac
For 3202L monitors:
To keep the product operating at an optimum level please limit the product usage cycle to 18
hours for every 24 hours:
Usage duty cycle:
18 hours on per 24 hours
Elo recommends using the Content Management System or O/S scheduling settings and/or EloView
commands to manage duty cycle. This will enable power savings and trouble free operation
throughout the life of the monitor.
Operating Frequency
Range
Range
50/60 Hz
Operating Current
Rating
1.8 A
User Manual: Interactive Digital Signage
SW602296 Rev A, Page 13 of 39
Advertisement
Table of Contents
