Factory Default Settings - NETGEAR EX7300v2 User Manual

Factory default settings

To reset the extender to factory default settings, you can use the Factory Reset button
on the side panel or you can log in and click the onscreen RESET button. For more
information, see Return the extender to its factory default settings on page 50.
The following table shows the factory default settings.
Table 2. Factory default settings
Feature
Smart Setup
WiFi communication
WiFi network name (SSID)
Security
Transmission speed
Country/region
Operating mode
Data rate in the 2.4 GHz band
Data rate in the 5 GHz band
DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual
data throughput rate.
Supplemental information
AC2200 Nighthawk X4 X4 WiFi Mesh Extender
Default Settings
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11ac, 802.11n, 802.11g, 802.11b, 802.11a
Max 600 Mbps
Disabled by default
(When enabled the max data rate is 1733 Mbps)
Server and client are enabled
63 User Manual