Front Panel Control - HANNspree HANNS-G HS246 User Manual

User's Manual

FRONT PANEL CONTROL


Power Button:
Press this button to switch ON/OFF of monitor's power.

Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.

MENU /Enter:
Turn the OSD menu on or used as《confirmation》function during start-up .

Adjust :
1. Adjust Input source change and Audio volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
 【 】Button:
1. The OSD menu is used as《confirmation》function during start-up.
3. Press【 】to enter Source selections. (Selections include VGA,HDMI, etc. The actual
selections may very depending on the models. This function is only available in models with
digital inputs)

【 】Button:
1. Press【 】to enter volume adjustment.
 【AUTO】Button:
1. The OSD menu return to the previous menu.
2. The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function is
used to optimize the 「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a

place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have

to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the factory.

To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be

removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
12