Twin Needle Sewing - Necchi EX60 Instruction Book

q
v
z
x
c
w

Twin Needle Sewing

Turn off or lock out the machine before changing the
needle or threading the machine.
Make sure to press the twin needle key before sewing
w
with twin needle.
Do not use twin needles other than one included in
the standard accessories, otherwise the needle may
4
hit the needle plate, foot or hook and break.
q Stitch pattern:
w Thread tension dial: 3 to 6
e
e Presser foot:
NOTE:
• Use #60 or finer threads.
• Test the stitches before you begin to sew.
• Twin needle sewing is available only for the specific
Threading the machine for twin needle
Raise the needle to the highest position and raise the
presser foot.
Attach the extra spool pin and place a spool of thread on
the extra spool pin (refer to page 13).
q
q Extra spool pin
Draw both threads from the spools and pass them
through the points from z to m.
Make sure that the two strands of thread do not get
tangled.
Pass one of the threads through the needle bar thread
guide on the left, and the other on the right.
w Needle bar thread guide
Thread the needles from the front to back by hand.
NOTE:
Threading of points z to b is the same as for single
needle.
The needle threader cannot be used for the twin
needle.
b
n
m
49
CAUTION:
See left
Zigzag foot A or
Satin stitch foot F
patterns. For pattern identification, these patterns
are shaded in light grey on the stitch chart.