setting up your side-by-side
refrigerator
REMOVING THE REFRIGERATOR DOORS
If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors.
Removing and Installing the Freezer door
A few things to mention first.
•
Make sure that you lift the door straight up so the hinges are not bent or broken.
•
Be careful not to pinch the wire harness on the door.
•
Place doors on a protected surface to prevent scratching or damage.
1. Remove the upper hinge cover
gently pulling them apart
2. Remove hinge screws
and take off the upper hinge
removing it.
5
3. Remove the door from the lower hinge
4. After the refrigerator is placed to the specified position, install the freezer door in the reverse
order as follows: .
using a screwdriver, and then disconnect the wires by
1
.
2
and the ground screw
3
. Be careful that the door does not fall on you as you are
5
4
3
by carefully lifting the door straight up
6
7
6
2
by turning counter-anticlockwise,
4
.
7
setting up _15