Advertisement

Quick Links

KRK10s SUBWOOFER
USER GUIDE

Advertisement

Table of Contents
loading

Summary of Contents for KRK 10S2

  • Page 1 KRK10s SUBWOOFER USER GUIDE...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS ATTENTION CAUTION ATTENTION: POUR …VITER LES CHOC ELECTRIQUES, INTRODUIRE LA RISK OF ELECTRIC RISQUE DE CHOC ELECTRIQUE LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE NE PAS OUVRIR SHOCK DO NOT OPEN CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUíAU CAUTION: TO REDUCE THE RISK OF ELECTRIC FOND.
  • Page 3: Table Of Contents

    Unpacking ...........2 KRK Systems’ Design Philosophies ........3 System Controls .
  • Page 4: Introduction

    DJs. This manual is intended to inform you of the many features of your new KRK subwoofer and its operation. We encourage you to take a few minutes to familiarize yourself with the information in this manual.
  • Page 5: Unpacking

    KRK Systems. A Return Material Authorization (RMA) from KRK Systems is required before shipping a product to KRK Systems for repair. After obtaining a RMA from KRK Systems, all KRK Systems products in need of repair can be returned to Gibson Pro Audio.
  • Page 6: Krk Systems' Design Philosophies

    SPL or add low frequencies that demo well in the store. When you use a KRK monitor, you can be confident that your mixes will translate well to the wide variety of playback conditions that can occur in the real world. We want your audio mixes to sound good everywhere –...
  • Page 7 KRK’s ERGO Room Correction System KRK provides a stand alone, high performance room correction system called ERGO. ERGO provides the ability to use up to two subwoofers with dedicated crossover functionality and delay compensation. For more information about using ERGO with your monitoring system...
  • Page 8: System Controls

    System Controls Volume The input sensitivity is adjusted ( c o u n t e r c l o c k w i s e r e d u c e s sensitivity) with the rear panel mounted Volume control. Adjustment range is from -30dB to +6dB.
  • Page 9: Connecting Your System

    The power On/Off switch is located on the rear panel. The triangle in the KRK logo on the rear plate illuminates when power is applied. If a red LED is seen instead of green, this means the unit must be serviced by an au- thorized KRK service technician (see page 16 for more information).
  • Page 10: Hooking Up Your Subwoofer: Stereo Systems

    Hooking Up Your Subwoofer: Stereo Systems KRK subwoofers include a built-in crossover and amplifier, so you only need the appropriate hook up cables to integrate it into your existing monitor system. First, you’ll need to connect a pair of cables from the stereo monitor outputs of your console or audio hardware device to the left and right XLR, 1/4”...
  • Page 11 Subwoofer Hook Up with Passive Monitors If you are using passive (non-powered) monitors that require an external amplifier, you’ll first need to connect a pair of cables from the stereo monitor outputs of your console or audio hardware device to the left and right XLR, 1/4”, or RCA input jacks on the sub- woofer.
  • Page 12: Subwoofer Placement And Set Up

    There are some basic steps necessary to ensure you have a subwoofer operating in top form: 1) a room correction system such as KRK’s ERGO and/or room treatment; 2) proper placement of the sub within the room; and 3) proper electrical settings.
  • Page 13 Next, route a band-limited pink noise tone through the system, including satellite speakers (these test tones are available on the KRK website - see download link at the bottom of this page). 500Hz to 1kHz is within the fundamental frequency range of many vocalists and will allow you to set the volume of the satellites without exciting the subwoofer.
  • Page 14: Hooking Up Your Subwoofer: 5.1 Surround

    Hooking Up Your Subwoofer: 5.1 Surround This is a bit more involved than a stereo hook up since there are now six speakers involved— as well as something called Bass Management (see the Bass Management Theory sec- tion). Notice from Figure 3 that for professional use a separate 6-channel level control box is required between the mix-down deck and the monitor speakers.
  • Page 15 Beyond Stereo to 5.1 Surround When using a subwoofer for the LFE (Low Frequency Effects) channel in a 5.1 surround monitoring system, rotate the low pass filter all the way to the right to the 130Hz position. Note that the LFE channel is set with an additional 10dB of monitoring gain. To set this level, we recommend using 2-octave wide, band-passed, pink noise from 20 to 80Hz for the LFE channel and 500 to 2,000Hz for the near-field speakers.
  • Page 16: Bass Management Theory

    Bass Management Theory Bass management is a method for extending the bass response of small, near-field speakers used in 5.1 surround sound systems (familiarly called home-theatre systems). This is done by routing frequencies below a cutoff point to a separate subwoofer (sometimes called “bass redirection”...
  • Page 17: Removing The Subwoofer Grill

    Removing the Subwoofer Grill The subwoofer grill can be removed and the grill’s rubber gasket can be reinserted to show off your KRK10s woofer. However, if you place your subwoofer in proximity to your feet we highly recommend leaving the grill on to protect the speaker! To Remove the grill and replace the grill’s rubber gasket, follow these directions: 1.
  • Page 18: Troubleshooting

    The power light should illuminate. • Note: If a fuse change was needed (and the AV mains voltage is set correctly) yet upon powering the unit back up the fuse(s) blow again, please contact KRK Customer Service (1-800-444-2766 or service@gibson.com) for service recommendations.
  • Page 19 Please read the warranty card that was included in the shipping carton of your subwoofer. All products in need of repair can be returned to KRK/Gibson Pro Audio or to an authorized service center for service evaluations. For troubleshooting help and service assistance, please call KRK/Gibson Pro Audio Customer Service at 1-800-444-2766, or email service@gibson.com.
  • Page 20 Shipping Instructions • For the safest possible return to KRK, please use the shipping carton and packaging in which your monitor was originally shipped. • KRK cannot be responsible for any damages incurred during the shipping process due to poor packing. Make sure to insure your shipment.
  • Page 21: Specifications

    Specifications KRK10s Frequency Response 34Hz – 50Hz to 130Hz Variable 110dB Music and 113dB Peak Low Frequency Driver 10” High Excursion Glass Aramid Composite Woofer Cabinet Dimensions 15” x 14” x 16 1/16” (HxWxD) 38.2 cm x 35.5 cm x 40.8 cm Net Weight (each) 40.2 lbs.
  • Page 22 Notes...
  • Page 23 Notes...
  • Page 24 w w w . k r k s y s . c o m Our mission is to innovate, design and deliver superior audio products that form the bridge between an artistic vision and a realized dream. LITK00043 REV.D 01/08/2013...

Table of Contents