How To Set Drop Count For Rinse Spin - LG FH069FDL Owner's Manual

70
PROGRAMMING MODE - SETUP MODE

34 . how to set drop count for rinse spin

can be used to set the number of drop counts for each rinse spin.
enter setup mode.
You will see lqc1
Press the hot button.
Press the Warm or the cold button until
in the display.
Press the Start button.
Press the Warm or the cold button until
in the display.
Press the Start button.
Display default drop count.
Press Warm(+) or cold(-) button to select drop count
between 5~15
(Unit of drop count : 1)
Press the Start button.
The machine sets up the drop count, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
Button Display
appears
appears