Table of Contents
Advertisement
56
PROGRAMMING MODE - SETUP MODE
20. Prewash time setup
Prewash time setup can be used to set the time for prewash.
enter setup mode.
You will see lqc1
Press the hot button.
Press the Warm or the cold button until
in the display.
Press the Start button.
Press the Warm or the cold button until
in the display.
Press the Start button.
Display previous Prewash time.
Press Warm(+) or cold(-) button to select prewash time
between 4 and 8.
Press the Start button.
The machine sets up the prewash time, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
Button
Display
appears
appears
Advertisement
Table of Contents
