Hitachi RAS-10EH2 Instruction Manual page 13

2
Set the
(TIME) button.
AM
PM
2
Set the turn-off time with
the TIMER control button.
PM
2
Set the turn-on time with
the TIMER control button.
AM
4
Set the turn-on time with
the TIMER control button.
PM
AM
• The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button is order to use the same settings next time.
06L176_RAS-10_14EH1_En
3
Set the current time with
the TIMER control button.
PM
Example: The current time is 1:30p.m.
3
Point the signal window of the remote controller toward the indoor unit,
and press the
The (OFF) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
3
Point the signal window of the remote controller toward the indoor unit,
and press the
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
5
Point the signal window of the remote controller toward the indoor unit,
and press the
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
13
4
Press the (TIME)
button again. The time
indication star ts lighting
instead of flashing.
PM
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
Example: The device will turn off at 11:00p.m.
PM
The setting of turn-off time is now complete.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on early so that the preset
temperature be almost reached at 7:00 a.m.
AM
The setting of the turn-on time is now complete.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
PM
Example:
For heating, the device will turn off at 10:30 p.m.,
and then turn on early so that the preset
temperature be almost reached at 7:00 a.m.;
for cooling and dehumidifying, it will simply
AM
turned on at 7:00 a.m. The settings of the turn
on/off times are now complete.
– 13 –
11/30/06, 3:38 PM
• The time indication will
disappear automatically in 10
seconds.
• To check the current time
setting, press the (TIME)
button twice.
The setting of the current
time is now complete.
(RESERVED)
(RESERVED)
(RESERVED)