LG ATNQ36GNLE7 Installation Manual page 13

5
Fit the corner covers.
6
Open two screws of control panel cover.
Screw
7
Connect one display connector and two
vane control connectors of front panel to
indoor unit PCB.
The position marking on PCB is as:
Display connector : CN_DISPLAY
Vane control connector: CN_VANE 1,2
CN_VANE 1,2
8
Close the cover for control box.
INSTALLATION OF DECORATIVE PANEL(ACCESSORY)
CN_DISPLAY
9
Install the air inlet grille and Filter on the
panel.
- After inserting the edge of the grill into
the panel body, close the door lock and
press on the left, right, and center sec-
tions.
Installing the grill link on the panel body
Inserting the edge into the panel body
Closing the door lock
Check the left, right and central sections
13