Table of Contents
Advertisement
If optimise standby is switched on
(see "Programme options, Optimise
standby") the display will go out after
a few minutes, leaving just the /
indicator flashing slowly.
Press any button to switch the display
back on again for a few minutes.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10 hours,
and in minutes for durations below this.
When the set time is reached, the pro-
gramme selected will start automatic-
ally. The time remaining will appear in
the display and the indicator light
will go out.
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 minutes = .
1 hour up to 9 hours 30 minutes:
e.g. 5 hours = .
over 10 hours:
e.g. 15 hours =
Programme options
Starting a programme before the
Delay start period has elapsed:
A programme can be started before the
Delay start period has elapsed.
Proceed as follows:
Press and hold the / button for
at least one second.
The indicator light goes out and the
/ indicator light begins flashing.
Press the / button again.
The programme will begin and the /
indicator light will light up.
51
Hide quick links:
Advertisement
Table of Contents
