Table of Contents
Advertisement
The integrated Waterproof system offers protection from water
damage, provided the following conditions are met:
– The dishwasher is correctly installed and plumbed in.
– The dishwasher is properly maintained and parts are replaced
where it can be seen that this is necessary.
– the stopcock is turned off during longer absences from the home
(e.g. whilst on holiday).
The Waterproof system will work even if the appliance is switched
off. However, the appliance must remain connected to the electricity
supply.
The water pressure (flow pressure at the take-off point) must be
between 50 and 1000 kPa (0.5 and 10 bar).
If the dishwasher gets damaged, switch it off at the mains imme-
diately and call your Miele Dealer or the Miele Service Department.
While the appliance is under warranty, repairs should only be un-
dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply (switch it off
and withdraw the plug from the socket).
If the connection cable is damaged it must be replaced with a
special cable of the same type (available from Miele). For safety reas-
ons this work must be carried out by a Miele authorised service
technician only.
Warning and Safety instructions
13
Hide quick links:
Advertisement
Table of Contents
