Table of Contents
Advertisement
3 - To start the channel list upload, press .
4 - Select Channels and press (right) to enter
the menu.
5 - Select Channel List Copy and select Copy to
TV. You might be asked to enter the Child lock PIN
code of this TV.
6 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, press . Select Antenna/Cable
Installation and select Reinstall Channels.
Press and later Cancel to leave the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. To start the reinstallation,
press . Select Antenna/Cable Installation and
select Reinstall Channels. Select the correct country
and skip the channels search. Finish the installation.
When done, continue with step 2.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, press .
4 - Select Channels and press (right) to enter
the menu.
5 - Select Channel List Copy and select Copy to
TV. You might be asked to enter the Child lock PIN
code of this TV.
6 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
24.3
Digital Channel Installation
If you know the channel frequency of the channels
you want to install, you can search and store digital
channels one by one. For best results, contact the
service provider.
1 - Press , select All Settings and press OK.
2 - Select Channels > Antenna/Cable
Installation and press OK.
3 - Enter the PIN code if asked.
4 - Select Digital: Reception Test > Search and
press OK.
5 - Press the numbered buttons to enter the channel
frequency.
6 - Select Search and press OK.
7 - When the channel is found, select Done and
press OK.
70
Advertisement
Table of Contents
