Table of Contents
Advertisement
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
CVBS - Composite
Next to the CVBS signals add the Audio Left and Right
signals for sound.
Use an Audio L/R cinch cable if your device also has
sound.
.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theater System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theater System.
For more information, in Help, press the color
key
Keywords and look up Audio Out Settings.
If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
For more information, in Help, press the color
key
Keywords and look up Audio to Video
Sync.
4.2
Receiver - Set-Top Box
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Switch Off Timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Switch this timer
off to prevent the TV from switching off automatically
after a preset time without a key press on the remote
control of the TV.
For more information, in Help, press the color
key
Keywords and look up Switch Off
Timer for more information.
14
Advertisement
Table of Contents
