Table of Contents
Advertisement
30
Tips in CD recording
When recording CD tracks onto a tape, if you leave
the cassette deck in record-pause mode beforehand,
the cassette deck recording can be started at the same
time as the CD starts to be played (synchronous re-
cording function).
Beat cancel function
There may be cases in which beat noise interferes
with recording of AM(MW)/ LW broadcasting.
In such a case, press the TAPE EQ. key during record-
ing to reduce or suppress the beat noise.
Downloaded from:
http://www.usersmanualguide.com/
(For U.K.)
TAPE EQ.
1
Set the CD player in pause mode.
2
Select the track to be recorded with the skip
(4, ¢) keys.
(The CD player pauses at the beginning of
the selected track.)
3
Put the cassette deck in Record-pause mode.
(Press the REC/ARM key twice.)
4
Start playing the CD.
(Synchronous recording starts.)
÷ Recording stops when the stop (7) key of the CD player is
pressed. To stop the CD playback, press the stop (7) key
again.
Let's record
Advertisement
Table of Contents
