Dirt Devil MATRIXX M7118 Operating Manual page 32

2 Assembly
12
13
14
32
This is how to attach the nozzles:
WARNING:
Danger of injury! Only attach the nozzles if the appliance
is not connected to the power supply. Otherwise the
machine might start up and parts of your body, hair or
pieces of clothing might be sucked in.
ATTENTION:
Use only intact nozzles. Defective nozzles may scratch
or damage surfaces and objects.
NOTE:
Irrespective of whether a nozzle has a click lock or not, it
can be attached to the telescopic tube or handle. To
securely attach nozzles which don't have a click lock, it is
advisable to push them on firmly whilst moving them
back and forth.
1. Pull off the attached nozzle.
NOTE:
If a nozzle with click lock was attached before, you have
to unlock it before pulling off (Fig. 5/enlarged view).
2. Push the desired nozzle on the lower end of the tele-
scopic tube (Fig. 12) or if necessary directly onto the
handle (Fig. 13).
3. When putting on the nozzle, push firmly and rotate back
and forth to ensure it is securely in place.
4. Keep the other nozzles safe and inaccessible to chil-
dren.
5. Stow away nozzles no longer required in the accessory
compartment, as far as this is possible (Fig. 14).