07/16
Digital Inputs, Controller's Power Supply
Note: The inputs are arranged in two groups. You can wire one group as npn and the other as pnp,
or wire both groups as npn, or as pnp. In either case, the npn/pnp pins must be connected.
Input wiring, npn (sink)
Analog Inputs
Note: Shields should be connected at the signal source.
Analog Input wiring, current, 2 or 3 wire, AN2
and AN3
Note: If either I9 or I10 is wired as an npn digital input, the remaining input may not be wired as an
analog input.
4
Input wiring (I0-I8), pnp (source), (I9-I10), npn (sink)
Analog Input wiring, voltage, AN4 and AN5
Input wiring, pnp (source)
Analog Input wiring, current, 4 wire, AN2 and
AN3
Unitronics