Panasonic Lumix DC-GH5EFK Owner's Manual For Advanced Features page 317

11. Connecting to other equipment
• Disconnect the USB connection cable after printing.
• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining
battery power becomes low while the camera and the printer are connected, the status
indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If
not printing, disconnect the USB connection cable.
• Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is
displayed.
(May not be displayed depending on the type of printer used.)
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
Not available in these cases:
• Motion pictures, 6K/4K burst files, and images recorded with the Post Focus function cannot
be printed.
Selecting a single picture and printing it
1
Press 2/1 to select the picture and then press
[MENU/SET].
2
Press 3 to select [Print start] and then press [MENU/
SET].
Selecting multiple pictures and printing them
1
Press 3.
2
Press 3/4 to select an item and then press [MENU/SET].
[Multi Select]
[Select All]
[Print Set (DPOF)] Prints the pictures set in [Print Set] only.
[Rating]
3
Press 3 to select [Print start] and then press [MENU/SET].
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures and then press [MENU/
SET].
(When [MENU/SET] is pressed again, the setting is canceled.)
• After the pictures have been selected, press [DISP.].
Prints all the stored pictures.
Prints all images with [Rating] levels between [¿1] and [¿5].
317
PictBridge PictBridge
(P251)
(P249)