•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replaced parts that displayed a safety sign should also display the current sign.
•
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
How to Install Safety Signs:
•
Be sure that the installation area is clean and dry.
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in place.
•
Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
•
Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing paper.
BEFORE OPERATION
•
Carefully study and understand this manual.
•
Do not wear loose-fitting clothing, which may catch in moving parts.
•
Always wear protective clothing and substantial shoes.
•
Assure that all tires are inflated evenly.
•
Give the unit a visual inspection for any loose bolts, worn parts or cracked welds, and make necessary repairs. Follow the
maintenance safety instructions included in this manual.
•
Be sure that there are no tools lying on or in the equipment.
•
Do not use the unit until you are sure that the area is clear, especially children and animals.
SAFETY DECAL CARE
5