Canon PIXMA TR8560 Online Manual page 430

FAX settings
Is Dial tone detect set to ON?
Check6
Resend the fax after a while.
If you still cannot send the fax, select OFF for Dial tone detect in Advanced FAX settings under FAX settings.
FAX settings
Is fax number registered correctly in printer's directory?
Check7
Check the recipient's fax/telephone number, correct the fax/telephone number registered in the printer's
directory, and then send the document again.
Changing Registered Information
Note
• You can check the registered information in the printer's directory by printing RECIPIENT TELEPHONE
NUMBER LIST.
Summary of Reports and Lists
Does an error occur during transmission?
Check8
• Ensure that a message is displayed on the Fax standby screen. When a message is displayed on the Fax
standby screen, check the cause.
A Message for Faxing Is Displayed on Fax Standby Screen
• Print ACTIVITY REPORT and check for an error.
Summary of Reports and Lists
If a transmission error has occurred, see below.
Errors Often Occur When You Send a Fax
Is document loaded properly?
Check9
Remove the document, and then reload it on the platen glass or in the ADF.
Loading Originals
Does a printer error occur?
Check10
Ensure that an error message is displayed on the touch screen. When an error message is displayed on the
touch screen, check the cause.
When the error message with the support code is displayed, refer to
When the error message without the support code is displayed, refer to
If you are in a hurry, touch the Stop button to close the message, and then send the fax.
Is telephone line connected correctly?
Check11
Reconnect the telephone line cable to the telephone line jack.
Connecting Telephone Line
List of Support Code for
Message (Support Code)
430
Error.
Appears.