Install The Hood - Broan RM519004 Manual

INSTALL THE
HOOD
Note: at least two people
will be required to mount
the hood.
1. Raise the hood into its
mounting position.
2. Plug the power cord into
the electric
receptacle.
excess cord behind the
flue.
3. Align the rectangular
opening on the back of the hood with the
wall-mounting bracket. Gently lower the
hood until it securely engages the bracket.
Fig. 9
4. Level the hood with (2) screws
(3.9x9.5mm) and secure with (4)
mounting screws (4.8x38mm). Use
drywall anchors provided if wall studs or
framing are not available. Fig. 9
5. Secure the electrical system plate to the
range hood with (2) mounting screws
(3.9x9.5mm). Fig. 10
6. Raise the upper flue until its holes align
with holes in the flue mounting bracket
(located on ceiling). Fig. 11
7. Secure the flue with (2) mounting screws
(3.9x9.5mm). Fig. 11
LEVEL
SCREWS
(3.9x9.5mm)
MOUNTING
SCREWS
(4.8x38mm)
wall
Tuck
- 9 -
MOUNTING
SCREWS
(4.8x38mm)
3.9x9.5mm
SCREWS
3.9x9.5mm
MOUNTING SCREWS
WALL FRAMING
MOUNTING
BRACKET
RECTANGULAR
CUTOUT
FIG. 9
ELECTRICAL
SYSTEM
PLATE
FIG.10
FIG.11