Table of Contents
Advertisement
OWI User Manual: Model 2X2AMP-HD2S61 Speaker Amplifier
NOTE: Installation is to be completed by a qualified electrical technician according to
NEC/CEC code and applicable local codes.
Installation Instructions for
The 2X2AMP-HD2S61 carton includes:
1. One (1) each 2X2AMP-HD2S61 (3 Source Amplified Speaker on a 2X2 Metal Tile
with backcan enclosure)
2. One (1) each UL Listed, Level 5 (Energy Star) Power Supply (electrical wire not
included)
3. One (1) each User Manual
The 2X2AMP-HD2S61 Combination carton includes items 1 to 5 above plus the following:
1. UL Listed 8 ohms in-ceiling speaker model 2X2IC6NA
*Note: Quantity of 8 Ohms Ceiling speakers on a 2X2 Metal Tile with backcan depends
on the SKU of the 2X2IC6NA Combination Program.
Speaker Placement
Before installing your OWI speakers, consider the placement carefully, taking into effect the location of
electrical, plumbing and other fixtures.
Placement in Ceiling
OWI speakers should be located above the primary listening area.
Mounting your OWI speakers
Determine the best area to mount your OWI speakers. It will be necessary to run your speaker wires to
that location. This location must be free of obstructions, such as electrical conduits, HVAC ducts, or
water lines.
Be sure that there is at least a 5 inches clearance behind the mounting surface. Make sure that no
objects block the back of the speaker.
Remove the round cardboard disc from the template supplied and keep it for later use as a paint mask,
if you decide to paint your speakers.
Once you have determined there are no obstructions in your desired mounting location route the
speaker wires from your amplifier to your opening. Avoid routing the speaker wire near electrical wires.
If you have to run them parallel, make certain to space the speaker wires at least 2 feet from the AC
line. Do not nail or staple the speaker wire.
OWI INC.
INSTALLATION
Speaker Combination Model 2X2AMP-HD2S61
15
www.owi-inc.com
Advertisement
Table of Contents
