Settings For External Equipment; Connection To External Equipment - Sharp DV-RW360S Operation Manual

Vcr/dvd recorder combination

Hide thumbs Also See for DV-RW360S:

Operation manual (101 pages)

Operation manual (101 pages)

Table Of Contents

100

101

Table of Contents

Note

• If you have not set the clock, the clock setting window will appear at step 3. Follow to step 4 in "Clock

Setting" on page 22.

• You cannot set the End time for the Satellite Link Timer Recording on this unit.

• Recording picture will be distorted if the copy protection signal is being detected during Satellite Link

Timer Recording.

• When a regular Timer Recording and the Satellite Link Timer Recording are overlapped, those

recordings are recorded as illustrated below.

Example 1

Timer

Recording

Satellite Link

Actual

Recording

Connection to external equipment

Connect the external equipment

using either the input terminals,

AV1, AV2, (Rear) or AV3 (Front).

However, for AV3 jacks, you

have to select S-INPUT or VIDEO

input jacks depending on the

connected devices.

Use a commercially available

Scart, S-Video or Video cable

and an Audio cable for this

connection.

In stop mode, press [SETUP].

Select "Required Setting"

using [Cursor K / L], then press

[ENTER].

Required Setting

Select Video

TV Aspect

Downloaded from:

http://www.usersmanualguide.com/

Recording

Satellite Link (cont'd)

Timer

Recording

Satellite Link

Actual

Recording