Recharge The Battery From A Computer Usb Port; Use The Usb Type C Cable To Charge Only - NETGEAR MR1100EE User Manual

Nighthawk LTE Mobile Hotspot Router Model MR1100

Recharge the Battery From a Computer USB Port

To recharge the battery from the USB port on your computer:
Attach one end of the micro USB cable to the mobile router and plug the other end into the USB port
on your computer.
The Battery bar on the LCD indicates that the battery is charging.
Note The LCD goes into sleep mode after a set time to extend battery life. To wake up the
LCD, press and quickly release the Power button.

Use the USB Type C Cable to Charge Only

You can log in to the mobile router and specify a setting so that the USB type C cable is used only for
charging and not to access the mobile router using a web browser. You might want to do this if you are
using the Ethernet port and a wall socket is not available to charge the mobile router.
To specify a USB type C cable charge-only setting:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The mobile router dashboard displays.
4. Select Setup > Router Setup.
Manage Battery Usage and Charging
23