Samsung UBD-M9000/XU Full Manual page 25

7. On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter letters by selecting a letter with an arrow
button, and then pressing
| NOTE |
\ To view the password as you enter it, use the
arrow buttons to select Show Password on
the right side, and then press
8. When finished, select Done and then press
the (OK) button. The product verifies the
network connection and then connects to the
network.
9. When verification is complete, select OK, and
then press the (OK) button.
| NOTE |
\ You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1. Follow the directions in Wireless - Automatic
through Step 6.
2. The product searches for a network, and then
displays the connection failed message.
3. On the bottom of the screen, select IP
Settings, and then press the
The IP Settings screen appears.
4. Select the IP Settings field, and then press
the (OK) button.
5. Select Enter manually in the IP Settings
field, and then press the
6. Select a parameter to enter (IP Address, for
example), and then press the
Use the Left/Right buttons on the remote
control to enter the numbers for the
parameter.
Use the Left/Right/
remote control to move from entry field to
entry field within a parameter. When done with
one parameter, select the Done.
(OK) button.
(OK) button.
(OK) button.
(OK) button.
(OK) button.
(OK) buttons on the
25
7. Press the Up or Down button to move
to another parameter, and then enter the
numbers for that parameter following the
instructions in Step 6.
8. Repeat Steps 6 and 7 until you have filled in
all parameters.
| NOTE |
\ You can get the Network parameters from your
Internet provider.
9. When finished, select OK, and then press the
(OK) button. The Security Screen appears.
10. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter letters
by selecting a letter with the Up/Down/Left/
Right buttons, and then press the
button.
11. When finished, select Done at the right of the
screen, and then press the
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network, select
OK, and then press the
WPS(PBC)
Ğ
1. In the Home screen, select Settings, and
then press the
2. Select General, and then press the
button.
3. Select Network, and then press the
button.
4. Select Network Settings, and then press the
(OK) button.
5. Select Wireless in the Network Type screen,
and then press the
product searches for and then displays a list
of the available networks.
6. Press the Down button on your remote, and
then press the
WPS. The "Press the WPS or PBC button
on your wireless router within the next two
minutes." message appears.
English
(OK)
(OK) button.
(OK) button.
(OK) button.
(OK)
(OK)
(OK) button. The
(OK) button to select Use